Technics SX-PR270 M User Manual

Removing
the
speakers
1.
Remove
the
mounting
screws
for
the
rear
board
of
the
speaker
box
(@
4
pcs.
and
@
10
pcs.).
eBe
careful
that
the
speaker
box
does
not
fall
off,
since
it
comes
free
of
the
L-shaped
bracket
of
the
stand.
2.
Remove
the
mounting
nuts
for
the
16
cm
speakers
(©
4
pcs.
each).
3.
Remove
the
mounting
screws
for
the
6.5
cm
speakers
(@
4
pcs.
each).
[6]
Key(s)
Assembly
Disassembly
1.
Insert
the
front
part
of
the
key
into
the
chassis.
1.
Remove
the
keyboard
assembly
(see
Step
[4]).
2.
Insert
the
plate
spring
into
the
hammer
notch
as
2.
To
release
the
key
claw.
shown
in
Figure
10.
@
Press
the
front
of
the
key
downward
slightly.
3.
While
slowly
lowering
the
key
into
the
chassis,
©
Press
the
rear
of
the
key
forward
gently.
insert
the
plate
spring
into
the
notch
at
the
rear
of
3.
To
remove
the
key,
lift
as
shown
in
Figure
9.
the
key.
NOTE:
.
Carefully
insert
the
key
into
the
opening
in
the
e
The
key
claw
is
easily
broken.
Do
not
apply
undue
chassis
and
slide
the
key
towards
the
rear
to
lock
force.
Should
a
key
claw
break,
it
can
still
be
used;
it
in
place.
however,
a
replacement
is
recommended.
e
if
a
black
key
is
to
be
replaced
it
is
necessary
to
remove
both
adjacent
white
keys.

Technics SX-PR270 M Specifications

General

Brand	Technics
Model	SX-PR270 M
Category	Musical Instrument
Language	English