Technics SX-PX226/M

Metronome
You can play tn time with the metronome sound, and you can add an accent to the metronome sound
METRONOME sound
1 Press the METRONOME button to turn it on
METRONOME
e The metronome sound begins
2 Adjust the tempo with the TEMPO buttons
YEMPO
w a
METRONOME volume
1
Press the VOLUME BEAT button so that the
VOLUME indicator lights
METRONOME
Accented METRONOME sound
1
.Press the VOLUME BEAT button so that the
BEAT indicator lights
METRONOME
CH
t
Use the TEMPO buttons to select the time
signature
Select a time signature from OFF, 2/4 [2-4],
3/4 [3-4], 4/4 [4-4], 5/4 [5-4] and 6/8 [6-8]
An accent is added to the first beat of each
measure of the selected time signature
12
o
Each time the V button ts pressed, the tempo
slows down, and each time the A button is
pressed, the tempo speeds up
The tempo can be adjusted to | = 40-300 and
is shown on the display
Press and hold either TEMPO button to
change the tempo quickly
Pressing both TEMPO buttons at the same
time returns the tempo to the standard / = 120
Press the METRONOME button again to turn
off the metronome sound
Use the TEMPO buttons to adjust the volume
Each press of the A button increases the
volume, and each press of the V button
decreases the volume
The volume can be adjusted to a setting from
1to9
If the two buttons are pressed at the same
time, the volume returns to the standard set-
ting
When you have finished making the setting,
press the VOLUME BEAT button twice so that
the indicators go out
The accent is shown on the display
Accent
indication
If OFF is selected, the beat is not accented
Pressing both TEMPO buttons at the same
time returns the time signature to the standard
4/4 time
When you have finished making the setting,
press the VOLUME BEAT button once so that
the indicators go out