Technics SX-PX226/M

The following kinds of data can be transmitted/received.
Key note on/off data (keyboard performance data)
Pedal on/off data
DIGITAL EFFECT on/off data
PROGRAM CHANGE (sound selection change) data", etc.
* Refer to page 22 regarding data transmission.
e SEQUENCER and DEMO performance data cannot be transmitted.
Assigning the MIDI CHANNEL (MIDI CH)
You can assign a MIDI CHANNEL number (1—16)
to this instrument.
Data can be exchanged only when the channel
on the transmitting side matches the channel
on the receiving side.
The default channel setting is 1 (for the LEFT
part, 2).
While pressing the MODE SET button, use the
16 lowermost keys (see illustration) to assign the
desired MIDI CHANNEL number.
The selected MIDI CHANNEL number is
shown on the display.
l1
.
^m,
« While pressing the MODE SET button, turn on
the left TRANSPOSE button (DOWN) before
assigning the MIDI CHANNEL for the LEFT
part. (The setting which is active when the
MODE SET button is pressed is always the
right TRANSPOSE button [UP], which is for
the RIGHT part.)
21 24 28 36 48
L__ MIDI note number