Technics SX-PX228B

Reverb depth
The depth of the DIGITAL REVERB can be adjusted for each reverb type
1 Select a type of DIGITAL REVERB
DIGITAL
REVERS
2 While pressing the MODE SET button, press
the DIGITAL REVERB button
MODE DIGITAL.
SET REVERB
О ROOM
XO STAGE
om
à 3
o The indicator for the selected type flashes
3 Use the TEMPO buttons to adjust the depth
of the reverb
9С
e The current reverb depth (1-10) is shown on
the display
e Each press of the A button increases the
reverb depth, and each press of the V button
decreases the reverb depth
е To return instantaneously to the standard
reverb depth, press the two TEMPO buttons
at the same time
4 When you have finished adjusting the reverb
depth, press either the MODE SET button or
the DIGITAL REVERB button
e The depth of the other DIGITAL REVERB
types can be adjusted in the same way
String resonance
String resonance is the sound heard in an acoustic piano when the struck strings produce a sympathetic
resonance of the other unstruck strings For the GRAND, UPRIGHT and ROCK sounds, string resonance
ıs produced as long as the sustain pedal is depressed The amount of string resonance can be adjusted,
and is common for all the sounds
e When the DIGITAL REVERB is on, there is no string resonance
1 Press and hold the GRAND button for about
3 seconds
SOUND
b Paen POUR E dd E пан? и "es xiu WEN Era
гајаја јаја ја
2 Use the TEMPO buttons їо adjust the amount
of resonance (0-10)
VALUE.
e Each time the A button ts pressed, the
resonance Increases Each time the V button
Is pressed, the resonance decreases
* When set to O, there is no string resonance
e Pressing both buttons at the same time will
return the instrument to the standard
resonance
3 When you have finished adjusting the string
resonance, press the GRAND button again