Technics SX-PX662

n Record TRACK 1.
1.Select the sound and set the DIGITAL EFFECT to on
or off.
2.Press the RECORD button to turn it on.
SEQUENCER
метов [ERTED] RE mene
е The TRACK 1 and 2 indicators flash rapidly.
• The tempo setting will appear on the display.
3.Press the TRACK 1 button.
е The TRACK 2 indicator goes out and the TRACK 1
indicator flashes slowly.
ш Record TRACK 2.
1.Select the sound and set the DIGITAL EFFECT to on
or off.
2.Confirm that the TRACK 1 indicator is lit.
• If itis not lit, press the TRACK 1 button to turn it on.
3.Press the RECORD button to turn it on.
SEQUENCER
START/STOP қ! nent
ЕРІНЕ
• The TRACK 2 indicator flashes rapidly.
4.Press the TRACK 2 button.
2
b:
• The TRACK 2 indicator flashes slowly.
4.Play the TRACK 1 part.
Recording starts when you begin to play the keyboard.
• Recording will also begin if the START/STOP button
is pressed. In this case recording begins after a one-
measure count.
5.When you have completed recording the TRACK 1
part, press the RECORD button to turn it off.
m m
E
« Recording will also stop if the START/STOP button is
pressed.
e The indicator for the recorded track changes from
flashing to the lit condition.
5.Play the TRACK 2 part.
е Because the part already recorded in TRACK 1 is
played back automatically, you can play the TRACK
2 part in time with it.
“ Recording will also begin if the START/STOP button
is pressed. in this case recording begins after a one-
measure count.
6. When you have completed recording the TRACK 2
part, press the RECORD button to turn it off.
L PEQORD |
o
|
15
QQTG0635