Technics SX-PX663 User Manual

Tpanspose
Suppose you learn to play a song—in the key of C, for example—and decide you want to sing it, only to find it's either
too high or too low for your voice. Your choice is to either learn the song all over again, in a different key, or to use
the TRANSPOSE feature.
Use the TRANSPOSE buttons to adjust the key. • |f the two buttons are pressed at the same time, the
key returns to C.
» |f either of the TRANSPOSE indicators remains lit, it
TRANSPOSE indicates that the piano is set to a key other than C.
DOWN uw
i D
e |f either of the buttons is pressed once, the current
setting value will appear on the display, and it can
then be changed.
• When setting the key, the current key is shown on the
display.
Each press of the DOWN button: Н Each press of the UP button:
G [-5 I-A EHSI-A [-8 )- P EIB [-5 Je >D [fb DI d JE LES]9E E PFI F HF IES]
[ ] shows the indication on the display.
Tuning
The pitch of the instrument can be adjusted. This capability is useful, for example, for ensemble playing.
1.Press the DEMO and MODE SET buttons simul- 2.Use the TEMPO buttons to adjust the pitch.
taneously.
DEMO MODE
A SET
тумб
« Press the A button to raise the pitch and press the V
• The current tuning is shown on the display. button to lower the pitch (427.3-440.0-453.0 H2).
e Press and hold either TEMPO button to change the
pitch quickly.
е The 100's digit (4) is not shown on the display. Тһе
decimal can be set to 0, 3 or 6.
• if both TEMPO buttons are pressed at the same time,
the pitch returns to 440.0 Hz.
3.When you have finished adjusting the pitch, press
either the DEMO button or the MODE SET button.
11
QQTGO635

Technics SX-PX663 Specifications

General

Brand	Technics
Model	SX-PX663
Category	Musical Instrument
Language	English