Technics SX-PX663

Metronome
You can play in time with the metronome sound, and you can add an accent to the metronome sound.
METRONOME sound
1.Press the METRONOME button to turn it on.
METRONOME
е The metronome sound begins.
2.Adjust the tempo with the TEMPO buttons.
TEMPO
ж
e Each time the V button is pressed, the tempo slows
down, and each time the A button is pressed, the
tempo speeds up.
• The tempo can be adjusted to ! = 40-300 and is shown
on the display.
• Press and hold either TEMPO button to change the
tempo quickly.
е Pressing both TEMPO buttons at the same time returns
the tempo to the standard != 120.
3.Press the METRONOME button again to turn off the
metronome sound.
METRONOME volume
1.Press the VOLUME BEAT button so that the VOLUME
indicator lights.
METRONOME
“)
ж
ЕС
2.Use the TEMPO buttons to adjust the volume.
e Each press of the A button increases the volume, and
each press of the V button decreases the volume.
е The volume can be adjusted to a setting from 1 to 9.
• |f the two buttons are pressed at the same time, the
volume returns to the standard setting.
3. When you have finished making the setting, press the
VOLUME BEAT button twice so that the indicators go
out.
Accented METRONOME sound
1.Press the VOLUME BEAT button so that the BEAT
indicator lights.
METRONOME
2.Use the TEMPO buttons to select the time signature.
е Select a time signature from OFF, 2/4 [2-4], 3/4 [3-4],
4/4 [4-4], 5/4 [5-4] and 6/8 [6-8].
е An accent is added to the first beat of each measure
of the selected time signature.
• The accent is shown on the display.
Accent
indication
• |f OFF is selected, the beat is not accented.
е Pressing both TEMPO buttons at the same time returns
the time signature to the standard 4/4 time.
3. When you have finished making the setting, press the
VOLUME BEAT button once so that the indicators go
out.
13
QQTG0635