Technics SX-PX663 User Manual

Reverb depth
The type and depth of the DIGITAL REVERB can be adjusted for each sound.
1.Select a sound.
2.Select a type of DIGITAL REVERB.
DIGITAL
REVERB
O REON
Ogag
онш
ожа
3.While pressing the MODE SET button, press the DIG-
ITAL REVERB button.
MODE DIGITAL
SET nian
^ / e De
e The indicator for the selected type flashes.
4.Use the TEMPO buttons to adjust the depth of the
reverb.
TEMPO
Bü
е The current reverb depth (1-10) is shown on the dis-
play.
« Each press of the A button increases the reverb depth,
and each press of the V button decreases the reverb
depth.
• To return instantaneously to the standard reverb
depth, press the two TEMPO buttons at the same time.
5.When you have finished adjusting the reverb depth,
press either the MODE SET button or the DIGITAL
REVERB button.
String resonance
String resonance is the sound heard in an acoustic piano when the struck strings produce a sympathetic resonance
of the other unstruck strings. For the GRAND (PX662)/ CONCERT GRAND (PX664), UPRIGHT and POP GRAND
(PX664) sounds, string resonance is produced as long as the sustain pedal is depressed. The amount of string resonance
can be adjusted, and is common for all the sounds.
e When the DIGITAL REVERB is on, there is no string resonance.
1.Press and hold the GRAND (PX662)/ CONCERT
GRAND (PX664) button for about 3 seconds.
SOUND
ato UPRIGHT ЕРАМ! EPA: НАРИ vers mas oca (ҰШЫ
ТІНЕ ШЕШЕ ШЕ
(РХ664)
2.Use the TEMPO buttons to adjust the amount of res-
onance (0-10).
TEMPO
L5 | ЦП
12
QQTGO0635
• Each time the A button is pressed, the resonance
increases. Each time the V button is pressed, the
resonance decreases.
• When set to 0, there is no string resonance.
* Pressing both buttons at the same time will return the
instrument to the standard resonance.
3.When you have finished adjusting the string reso-
nance, press the GRAND button again.

Technics SX-PX663 Specifications

General

Brand	Technics
Model	SX-PX663
Category	Musical Instrument
Language	English