27
NETWORK MENU
TV Menu Operation
To access this menu you must fi rst access the Settings menu and select Network.
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
For the network confi guration to work the TV will need to be connected to your home network via an
ethernet cable, with these requirements in place the TV will connect to the network automatically.
The Network connection is used for Freeview HD services only. (Freeview services are only available in the
UK). It is not intended to be used for internet/network use.
IP Confi g - Allows you to access LAN network connection settings. Choose from the following modes:
Network Info - Allows you to view Information about network settings.
Network Test - Allows you to test the network connection.
Auto - The auto mode will automatically connect the TV to your home
network (this is the default setting and is highly recommended).
Manual - If the Manual moide is chosen you will able to scroll down and
manually change the IP, Netmask, Gateway and DNS information.
User Guide -Technika - 22-24 inch models TEC-MAN-0100.indd Sec1:27User Guide -Technika - 22-24 inch models TEC-MAN-0100.indd Sec1:27 09/12/2016 10:54:5309/12/2016 10:54:53
To Next Page
Loading...
Need help?
General
