Technical Specification
Ceramic Hob
2RSS-5
Cooking Zones 2 Zones
Supply Voltage 220-240V~ 50 Hz or 60Hz
Installed Electric Power 3000W
Product Size D×W×H(mm) 590×520×50
Building-in Dimensions A×B (mm) 270×495
Ceramic Hob CFE641-5
Cooking Zones 4 Zones
Supply Voltage 220-240V~ 50 Hz or 60Hz
Installed Electric Power 6400W
Product Size D×W×H(mm) 590×520×50
Building-in Dimensions A×B (mm) 565×495
Ceramic Hob CFE942-5
Cooking Zones 4 Zones
Supply Voltage 220-240V~ 50 or 60Hz
Installed Electric Power 6400W
Product Size D×W×H(mm) 900×350×50
Building-in Dimensions A×B (mm) 880×335
Weight and Dimensions are approximate. Because we continually strive to improve our
products we may change specifications and designs without prior notice.
22
23
Installation
Preparation of the work surface
• Cut out the work surface according to the sizes shown in the drawing.
• For the purpose of installation and use, a minimum of 50mm space shall be
preserved around the hole.
• Be sure the thickness of the work surface is at least 30mm. and suitable for
the application.
Ensure the cooktop is well ventilated and the air inlet and outlet are not blocked.
Ensure the cooktop is in good working order.
Install Rangehoods and Exhaust Fans in accordance to the manufacturer’s
instructions. No closer than 600mm above the cooktop for Rangehoods and
750mm for Exhaust Fans.
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
2RSS-5 290 520 50 46 270 495 50 min
CFE641-5 590 520 50 46 565 495 50 min
CFE942-5 900 350 50 46 880 335 50 min