16
Using the timer to switch off one or more cooking zones
1. Select the heating zone you wish to set the timer for.
2. Touch timer key, “00” will show in the timer display and
the “0” will blink.
3. Set the time by touching “-” or “+” keys (e.g. 5)
4. Touch timer key again, the “0” will blink.
5. Set the time by touching “-” or “+” keys (e.g.9)
6. Touch the timer key again.
Now the timer is set for 95 minutes
7. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
Note: There will be a red dot in the right bottom corner of
power
level indicator which shows the timer is set for that zone.
8. When cooking timer expires, the corresponding cooking
zone will switch off automatically.
Note: Other cooking zones will keep operating if they are turned on previously.
17
If the timer is set on more than one zone:
1. When you set the timer for several cooking zones, red dots of the relevant cooking
zones are indicated. The timer display shows the remaining time. The dot for the
corresponding zone blinks.
Note: You can check the remaining time for the other zones by touching the
corresponding heating zone selection key.
(set to 15 minutes)
(set to 45 minutes)
2. Once the set time expires, the corresponding zone will switch off. Then it will
show the remaining time for the other heating zone and the dot for that zone
will blink.
Cancelling the timer
1. Touch the heating zone selection key for the timer that you
wish to cancel.
2. Touch the timer key, the first indicator will flash (e.g. “5”)
3. Touch the “-“ key to set the timer to“90”
4. Touch the timer key again, the second indicator will flash (e.g. “9”)
5. Touch the “-” key to set the timer to“00”
The timer is now cancelled.
Note: Turning off the heating zone or hob will also cancel the timer.
To Next Page
Loading...
Need help?
General
