What to do if my Technika TV DVD Combo remote control is not working?
If your remote control isn't working, check if the batteries are depleted or installed incorrectly. Also, ensure there are no obstructions between the remote control and the unit's receiving window, and that the receiving window isn't exposed to strong light.
What to do if my Technika TV DVD Combo has a black screen and the power indicator light is off?
Check if the power cord is well connected and if the unit is powered on. Also, verify that the signal cord of the input device is properly connected and that the input device is powered on.
Why Technika 32-601 is not playing disc?
The disc may not play for the following reasons: 1. Condensation on the laser head. If this is the case, switch on the power and wait for 1 to 2 hours. 2. The disc might not be properly loaded. Make sure the label side of the disc is facing up. 3. The disc may not be compatible with the unit. Confirm whether the unit is compatible with the disc.
How to resolve image display flicker on Technika TV DVD Combo?
To resolve image display flicker, verify the input device signal is within the unit's specifications. Also, check the computer output mode in the control panel display setup and adjust if necessary. Ensure the horizontal scanning frequency is between 30kHz and 75kHz and the vertical scanning frequency is between 50Hz and 75Hz.
What causes sound distortion on my Technika 32-601 and how to fix it?
Sound distortion can occur due to: 1. The volume of the connected device being too high. Adjust the device volume. 2. The sound field mode not being suitable for the disc. Adjust the sound field accordingly.
What to do if the volume is too low on my Technika 32-601 TV DVD Combo?
First, check the volume level. If the volume remains too low even at maximum setting, ensure the input device is properly set.
Why does my Technika TV DVD Combo have a snowy picture?
A snowy picture may be due to a damaged or poorly connected input antenna.
How to fix no disc reading issue on Technika TV DVD Combo?
If the unit is not reading discs, it could be due to: 1. A warped or dirty disc. Clean the disc. 2. The disc not being correctly placed. Reload the disc with the label side facing up. 3. Condensation on the laser head. Switch on the power, unload the disc, and leave it for about 1 hour.
What causes temporary function failure on Technika 32-601 TV DVD Combo?
Temporary function failure can occur due to: 1. Using a mal-fabricated disc. Wait for 5 to 10 seconds to restore normality automatically. 2. Pressing the wrong buttons. Operate again. 3. Static leakage into the unit from outside. Power off for 1 to 2 minutes, then power on again.
Why is there no subtitle on my Technika 32-601?
The reason for no subtitle may be: 1. No subtitle made in disc. This is disc problem. 2. The unit subtitle is turned off. Press the Subtitle button to select it.
General| HDMI Ports | 2 |
|---|---|
| Built-in DVD Player | Yes |
| USB Ports | 1 |
| Built-in Freeview | Yes |
| Screen Size | 32 inches |
| Display Resolution | 1366 x 768 |
Essential safety advice to ensure safe operation of the TV.
Detailed safety guidelines and warnings for product usage and maintenance.
Details on the TV's mains supply and fuse replacement procedures.
Detailed explanation of each button's function on the remote control.
Adjusting DTV channels, tuning, and program editing.
Setting preferred audio languages and subtitle display options.
Managing ATV channels, color systems, audio systems, and tuning.
Instructions for playing discs, pausing, stopping, and ejecting.
How to control the audio volume using the remote.
Adjusting picture parameters for DVD playback.
Configuring sound parameters for DVD playback.
General, preference, and function settings for DVD mode.
Setting language, sleep timer, aspect ratio, and restore settings.
Solutions for screen issues like black screen or flickering images.
Fixes for sound problems, no sound, or poor picture quality.
Resolving issues related to disc playback, sound, image, and color.
To Next Page
