17
TV Menu Operation
CHANNEL MENU
To access this menu, press [MENU] button on the remote control.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and
analogue devices
Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal
Analogue Tuning - Allows you to manually tune your analogue signal
Channel Edit - Allows you to delete, move, skip and favourite channels
Signal Information - Allows you to view signal frequency, signal quality and signal strength
CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be
inserted into the COMMON INTERFACE PORT (CI Card In)
Schedule List - Lists your programme reminders
Software Update (OAD) - Switch on/off OAD updates
Important: To receive Freeview/Saorview channels, in particular HD
channels, you will need a Digital TV aerial and be in a good Freeview/
Saorview coverage area. You can check the coverage for your area at
www.freeview.co.uk or www.saorview.ie
Please note that any Freeview HD channels found during tuning will
be placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
*Freeview channels are only available in the UK, Saorview channels
are only available in the ROI.
User Guide - 32F22B-FHD-DVD-32F22WFHD-DVD-40F22B-FHD-DVD - TEC-MAN-0086.indd Sec1:17User Guide - 32F22B-FHD-DVD-32F22WFHD-DVD-40F22B-FHD-DVD - TEC-MAN-0086.indd Sec1:17 06/03/2015 11:05:5606/03/2015 11:05:56
To Next Page
Loading...
Need help?
General
