Technika DAB229 - Tune to an Fm Preset Station

9
TUNE TO AN FM PRESET STATION
In FM mode:
1. Press the ‘PRESET’ button. ‘Preset 1’ is displayed
and the name or frequency of the station stored
there, or ‘EMPTY’ if no previous station has been
stored.
2. Use the ‘VOL +’ and ‘VOL ’ buttons to move to the
Preset location where the station you would like to
listen to is stored.
3. Press the ‘SELECT’ button. The radio will instantly
tune to that station and begin to play.
NOTE: If no FM station has been stored under the
preset, the radio will immediately revert to the
previously selected radio station.
FM DISPLAY INFORMATION
When listening to an FM station you can change the
information that will appear on the second line of the
display. There are several dierent types of information
that are sent by the broadcaster.
Radiotext (RT)
- this is scrolling text information supplied by the
broadcaster. Information could be the name of an artist
or music title, DJ’s name, contact details for the radio
station etc.
Program Type (PTY)
- such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
Frequency
- such as 93.30MHz
Time and Date
- supplied by the broadcaster.
Signal Information
- Stereo or Mono
Signal strength
- the information provided gives details of the signal
strength you are receiving. The row of solid rectangles
indicate the actual signal strength that you are
receiving. The stronger the signal, the further to the
right the row of solid rectangles will be.
1. Press the ‘MENU’ button ‘. Menu tune’ is displayed.
Press the ‘MENU’ button again. ‘Info’ is displayed.
2. Continue to press the ‘MENU’ button to cycle
through the dierent information options.
Technika DAB229 User Guide.indd 9 12/10/09 17:57:51