Technika DVD 105 - Playing an Audio CD; Advanced Operation; Connecting the Player; SCART Connection

To Next Page

To Previous Page

User HandbookDVD 105 DVD Player

Page 3

PLAYING AN AUDIO CD

Press OPEN/CLOSE to open the disc drawer

Load a disc into the tray, label side up

Press to close the disc drawer

The disc will now load. the player reads the disc, downloads the

Table of Contents (TOC).

will start automatically - a very few won’t

Press

Press to go forward one track at a time

Press to go back one track at a time

When you reach the final track you cannot go to the first track

using Press to go back through the

tracks.

Press repeatedly

Speed increases 2X 4X 8X 16X

Press to resume normal play

Press repeatedly

Speed increases 2X 4X 8X 16X

Press to resume normal play

Press The disc will pause

Press or to resume normal play

Press repeatedly to increase the volume

Press repeatedly to reduce the volume.

Press . The sound will be muted

Press again to restore the sound

Press .

Press to start play from the track at which the disc was

stopped.

using one of the methods shown here

Press twice to re-load the disc.

Press the keys to select a track. The highlight moves to

the track selected.

Press to play from the selected track

Press

Enter the track number using the number keypad

Press to play from the selected track

Press once to repeat the track

Press again to repeat the disc

Press again to cancel repeat

Press to select the start point ( )

Press o select the end point ( )

Press to return to normal play

Press to play tracks at random

Press again to resume normal play

Press to toggle the display between Time Elapsed

and Time Remaining on the current track. In Time Remaining

mode the display counts back to 0).

Most CDs

ENTER/PLAY

NEXT . PREVIOUS

ENTER

PAUSE/STEP.

PAUSE/STEP ENTER

VOLUME +

VOLUME-

MUTE

STOP

ENTER

Select Track 1 OR

OPEN/CLOSE

ENTER

GOTO

ENTER

REPEAT

A-B A

A-B t B

A-B

SHUFFLE

DISPLAY

BASIC OPERATION

ADVANCED OPERATION

To play an entire disc from the beginning

2) To change tracks when a disc is playing

3) Fast Forward Playback

4) Fast Reverse Playback

5) Pausing a disc

9) To alter the volume

10) To Mute the sound

11) Stopping and Re-starting a Disc

To play a stopped disc from the start of the disc:

A) Choosing a track with the arrow keys

B) Choosing a track via the GOTO menu

C) Repeat

D) A-B Repeat

E) Shuffle Play

F) Display Indications

(not available at the digital audio outputs)

Page 10

CONNECTING THE PLAYER

SCART OUT

This is the player’s default connection mode and the most convenient to use. Both audio and video

signals are carried by the SCART lead.

Connect the SCART output of the DVD 105 to the SCART input of the TV set. If your TV has 2 SCART

connectors we suggest you use the connector which offers a choice of RGB and composite input.

The recommended setting is RGB (see Page 7). Please refer to your TV user manual to establish

whether the TV will support this feature.

Some TV sets offer composite video on SCART 2. Consult your TV user manual for details.only

Use only one of the connection methods described here

IF YOUR TV SET DOES NOT HAVE A DIRECT A/V INPUT

It may be possible to connect the DVD 105 to a VCR which

have A/V inputs and then play the VCR through the antenna input

of the TV set. This will produce an acceptable picture but will not

maximise the potential of the DVD medium.

Refer to your VCR manual to establish what connections the VCR

uses and use one of the connection methods described above.

does

.........

ANTENNA

VCR

Connect the composite Video output of the DVD 105 to the Composite Video input of the TV set. You

will also need to connect the Analogue audio outputs to the audio input sockets of the TV,

If your TV has only a mono audio input, you will need to purchase a ‘Y’ adaptor to combine the stereo

outputs of the DVD 105 to a mono output for the TV.

COMPOSITE VIDEO CONNECTION

Connect thecomposite Video output of the DVD 105 to the Composite Video input of the TV set.

You will also need to connect the Analogue audio outputs to the audio input sockets of the TV,

If your TV has only a mono input, you will need to purchase a ‘Y’ adaptor to combine the stereo

outputs of the DVD 105 to a mono output for the TV.

S-VIDEO CONNECTION

SCART CONNECTION

.........

AUDIO

VIDEO

AUDIO

VIDEO

00:01 06:32

001/017

TRACK02

TRACK03

TRACK04

TRACK05

TRACK01

TRACK06

Current

Track

Total

Tracks

Volume

Level

Playback

Status

Time

Indication

Play

Pause

Stop

00:01 06:32

/017

Repeat One

Repeat Folder

Folder

Highlight Bar at

bottom of display

A-B

PLAYING JPEG DISCS PLAYING OTHER FORMATS

Load the disc

ENTER

PAUSE PAUSE

STOP

OPEN/CLOSE

MP3 WMA

WMV

A display will open very similar to the CD display

If there is only one folder this will open to display the pictures.

If there are several folders the menu will display the folders

Navigate to the desired folder using the keys

Press to play all the pictures in sequence.

Press to hold a picture still. Press again to

continue play.

Press to stop the disc.

Press twice to reload the disc.

and (Windows Media Audio) files copied onto a

CDR from a PC will in most cases play normally as Audio CDs

but with a limited choice of menu and display options.

files are not supported. WMV files downloaded to a PC

will require conversion to an MPEG-2 format (such as VCD).

A mixed CD containing several folders may display some or all

the folders but incompatible formats will not be accessible.

NOTE: Home-recorded discs are widely variable and some

burners may not be compatible with this player.