To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if my Technika LCD32-407B LCD TV has no picture?
If your Technika LCD TV shows no picture, ensure that the power plug is securely plugged into the AC outlet and that the main power is turned on. Also, check the contrast, brightness, and volume settings.
Why does my Technika LCD TV have interference?
If you are experiencing interference with your Technika LCD TV, it might be due to electric appliances, automobiles, motors, vehicles, or fluorescent lamps. These can cause disturbances to the signal.
Why is there no sound on my Technika LCD32-407B LCD TV?
If your Technika LCD TV displays a normal picture but you can't hear anything, check the volume level and ensure that the sound isn't muted.
How to fix a snowy picture on Technika LCD32-407B LCD TV?
If your Technika LCD TV picture looks snowy, you should check the direction and connection of the antenna.
What to do if my Technika LCD32-407B has a double image?
If you're seeing a double or triple image on your Technika LCD TV, adjust the direction, station, and connection of your antenna.
How to fix Technika TV Receiver when there is no sound?
Try pressing the MUTE button to check if Mute mode is enabled. If not, switch to another channel to see if the problem persists. You can also press the VOL+ button to increase the volume and see if that resolves the issue on your Technika TV Receiver.
What to do if Technika TV Receiver screen is blank?
Ensure that the aerial and any other external sources are properly connected to your Technika TV Receiver. Try pressing the SOURCE button to select a different input source. You can also try turning the TV off and on again.
Why is there no picture on some channels on my Technika TV Receiver?
First, verify that the correct channel is selected on your Technika TV Receiver. Then, adjust the antenna to improve the signal. You can also make fine adjustments using the FINE TUNE and MANUAL SEARCH options.
Why is there no color on some channels of my Technika TV Receiver (black and white)?
First, check if the same problem occurs on other channels of your Technika TV Receiver. Then, ensure that the correct picture settings are selected.
What causes spots on some or all channels on Technika TV Receiver?
Check that the antenna is correctly connected to your Technika TV Receiver. Also, ensure that the antenna is in good condition. You can also make adjustments using FINE TUNE.
Identifies physical components of the TV's front and side.
Details the various input/output ports located on the back of the TV.
Instructions for connecting the TV to a broadcast antenna via a coaxial plug.
Guides for connecting various external devices like computers and media players.
Initial setup procedure for powering on the TV and selecting basic settings.
Prevents use of specific input sockets or the TV itself by locking them.
Allows changing the on-screen menu language for the TV.
Selects the colour system (e.g., PAL, SECAM, NTSC) for tuning.
Selects the TV sound system (e.g., B/G, D/K, L) for tuning.
General
