Use and Care
17
End Time
Setting of End Time
• Upon selection of end time function, next end time (time of day
plus cook time) is displayed. Set desired end time (max time of
day + 23:59 h:min) in increment/decrement steps of 1min.
• After the start of the programme, the display changes to the
time of day.
• Relay contacts open till the start time (i.e. when end time minus
cook time equals time of day).
Count-down of end time
• Count down starts automatically in the background in steps of
minutes.
• The ‘Auto’ symbol is displayed continuously.
• Upon reaching start time, relay contacts close, the ‘COOKING
POT’ symbol is on.
Expiry of end time
• After the end time has expired an acoustic signal sounds, the
symbol ‘Man’ flashes, the symbols ‘Auto’ and ‘COOKING POT’
switch off, the relay contacts open and the display will show
0:00 h:min.
• First press of the touchpad keys will cancel the acoustic signal.
Touching ‘SELECT’ closes the relay contacts and the ‘Man’
symbol will be switched on. The timer returns to the time of day.
To Next Page
Loading...
Need help?
General
