TechniSat DIGIT ISIO S3 - Page 89

89
DE
EN
Channel search/ISIPRO
You have various options for searching for new channels or updating the channel list.
You can either use the ISIPRO channel list function to download a new pre-programmed
channel list for your device from the satellite or run a channel scan.
> To download the current channel list, use the up/down arrow keys to
highlight the ISIPRO channel list update line and start the process by
pressing the OK buon.
Aer the channel list update, an automatic channel search on all other
configured reception sources is then carried out via “All Channels”.
> If you want to run a channel search via satellite as well, or if the DVB-S
reception signal has not been configured, use the up/down arrow keys to
highlight the All channels or All unencrypted channels field, then start the
channel search process by pressing the OK buon.
When using All channels, free-to-air and encrypted channels are searched for;
when using All unencrypted channels, only free-to-air channels are searched
for.