What to do if my TechniSat DIGIPLUS UHD S2 Tuner has no image, no sound, and the display is not illuminated?
If your TechniSat Tuner displays no image, no sound, and the display is not illuminated, the cause may be a lack of mains voltage. Please check the power supply to resolve this issue.
How to fix a TechniSat DIGIPLUS UHD S2 remote control that does not work?
If your TechniSat Tuner remote control isn't working, ensure that the correct remote control code is set or replace the batteries, as they may be spent.
What to do if my TechniSat Tuner has no image, no sound, but the display is illuminated?
If your TechniSat Tuner provides no image and no sound, but the display is illuminated, the issue could stem from several factors: * A short-circuit in the LNB connection: Switch off the device, rectify the short-circuit, and then switch the device back on. * A defective or missing cable connection: Check all cable settings. * A faulty LNB: Replace the LNB. * Incorrect outdoor unit setting on the receiver: Modify the setting.
Why is my TechniSat DIGIPLUS UHD S2 Tuner not receiving channels that were OK before?
If you are not receiving channels on your TechniSat Tuner that were previously working, the issue could be due to several reasons: * The dish may be incorrectly positioned or faulty: Check the dish. * The channel may now be transmitted on another transponder: Perform a search/scan. * The channel may no longer be transmitted.
What to do if TechniSat DIGIPLUS UHD S2 Tuner picture has square blocks or shows 'no signal'?
If your TechniSat Tuner picture sometimes has square blocks, freezes, or shows a black screen with a 'no signal' message, it could be due to: * Heavy rain or snow: Remove snow from the dish. * Dish incorrectly aligned: Re-align dish. * Dish is too small at the reception location: Use larger dish. * Obstacle between the dish and the satellite: Mount the dish in an unobstructed position.
How to fix an incomplete or distorted picture on my TechniSat DIGIPLUS UHD S2?
If your TechniSat Tuner is showing incomplete or distorted picture, it might be due to an incorrect picture format or display/zoom setting. Check the picture format and picture display/zoom settings in the menu.
Why does my TechniSat DIGIPLUS UHD S2 Tuner have sound but no TV picture?
If your TechniSat Tuner shows sound but no TV picture, check the setting, as radio mode may be selected and the radio background image is switched off.
How to resolve 'no picture via HDMI' on TechniSat DIGIPLUS UHD S2 Tuner?
If your TechniSat Tuner has no picture via HDMI, the set HDMI resolution may not be supported. Adjust the HDMI resolution to resolve this.
What to do if my TechniSat DIGIPLUS UHD S2 has no sound or incorrect sound?
If your TechniSat Tuner has no sound or the sound is incorrect, check the settings in the menu, Dolby Digital settings, and language selection.
Why are various channels not shown in the channel list on my TechniSat DIGIPLUS UHD S2?
If various channels are not shown in the channel list on your TechniSat Tuner, it is possible that an incorrect channel list is selected. To resolve this, select another channel list.
General| Tuner Type | DVB-S2 |
|---|---|
| UHD Support | Yes |
| HD Support | Yes |
| HDMI | Yes |
| USB | Yes |
| Input Connector | F-type |
| Modulation | QPSK, 8PSK |
| Supported Video Formats | MPEG-2, MPEG-4, H.264, H.265 |
| CI Slot | Yes |
| Smart Card Slot | Yes |
| Ethernet Port | Yes |
| Wi-Fi Support | No |
| HDMI Output | Yes |
| Scart Output | No |
| Composite Output | No |
| Component Output | No |
| Optical Audio Output | Yes |
| Weight | 1.2 kg |
| Video Resolution | 2160p (4K UHD) |
| Connectivity | Ethernet, USB |
| Input Frequency Range | 950 ... 2150 MHz |
| Symbol Rate Range | 2 Msps to 45 Msps |
| DiSEqC Compatibility | 1.0, 1.1, 1.2, USALS |
| Supported Audio Formats | MP3, AAC, AC3 |
To Next Page
