TechniSat DIGIPLUS UHD S2 User Manual

94
7 Optional accessories
IsiZapper remote control
Item no. 0000/3773
The IsiZapper remote control is an optional remote control that is specially designed
to operate ISI mode.
TechniSat ISIO USB dual-band WLAN adapter
Item no. 0005/3633
Bluetooth dongle
Item no. 0000/3635
External infrared receiver
Item no. 0000/3615
8 DIGIPLUS UHD S2 connection
8.1 Remote control / Changing the baery
WARNING
Ensure that the baeries are kept out of the reach of children. Children could
put the baeries into their mouths and swallow them. This could lead to
serious injuries. Seek medical advice immediately if this occurs! Therefore
ensure that the baeries are out of reach of young children.
> Open the cover on the baery compartment on the back of the remote
control by pressing gently on the point indicated and pressing in the direction
of the arrow.
> Insert the supplied baeries, ensuring that the poles are the right way round
(indicator visible in baery compartment).
> Close the baery compartment again.
8.2 Connecting the satellite system
> Connect the LNB inputs 1 and 2 (6/7) using two separate antenna feed
cables that are set up identically to be able to use the full range of functions.
or
> If there is only one antenna signal available, connect this to LNB input 1 (6) on
the device.
> Also observe the section on Antenna seing in the instruction manual.
It is not possible to receive analogue TV!
> For operation with a rotating system, connect the DiSEqC motor (Level 1.2) to
LNB input 1.

TechniSat DIGIPLUS UHD S2 Specifications

General

Brand	TechniSat
Model	DIGIPLUS UHD S2
Category	Tuner
Language	English