TechniSat DIGIPLUS UHD S2 User Manual

95
DE
EN
8.3 Connecting to a TV
> Connect the DIGIPLUS UHD S2 (HDMI output 9) and the TV (HDMI input)
using an HDMI cable (included in the scope of delivery). Switch your TV set to
the corresponding HDMI input to display the signal from the DIGIPLUS UHD
S2.
8.3.1 Sound output (electrical, digital)
> External audio amplifiers or stereo systems with digital electrical audio input
can be connected to the DIGIPLUS UHD S2 via the S / PDIF output jack
(electrical 11).
8.4 USB port
The USB ports on the back (10) of the DIGIPLUS UHD S2 are used to update the
operating soware and to transfer data.
Moreover, you can play films, music or images etc. in MPEG, mp3 or JPG format from
a USB storage device.
Your device has internal WLAN, which enables wireless integration into your existing
WLAN network. However, if you wish, you can also use an external WLAN dongle for
this purpose, for instance the TechniSat ISIO USB dual-band WLAN adapter (item no.
0005/3633) by inserting it into the USB port.
When doing so please also note the section on WLAN seings in the instruction
manual.
8.5 Network port (RJ45)
You can integrate the DIGIPLUS UHD S2 into your existing network via the LAN
connection (8). By doing so, you can, for example, use the ISIO Internet radio
functionality or control the device via the TechniSat CONNECT app.
To do so, also observe the Network seings section in your instruction manual.
8.6 External infrared receiver
Connect the optional infrared receiver to the EXT IR (12) jack on the back of the
TECHNIBOX UHD-S.

TechniSat DIGIPLUS UHD S2 Specifications

General

Brand	TechniSat
Model	DIGIPLUS UHD S2
Category	Tuner
Language	English