Why the antenna cannot be rotated on my TechniSat DIGIPLUS UHD S2 Tuner?
If the antenna of your TechniSat Tuner cannot be rotated, the motor may not be suitable for DiSEqC 1.2. Use a suitable dish.
How to make texts easier to read on my TechniSat DIGIPLUS UHD S2 Tuner?
If texts are difficult to read at a distance on your TechniSat Tuner, the character size may be set to 'small'. Adjust the character size to make the texts more readable.
Why does my TechniSat DIGIPLUS UHD S2 Tuner have no connection to the network?
If your TechniSat Tuner has no connection to the network, it could be due to: * Incorrect network settings: Check the network settings. * Network cable not connected correctly: Check the network connection. * Network connection not allowed: Allow network connection in Special functions > Allow network.
General| Tuner Type | DVB-S2 |
|---|---|
| UHD Support | Yes |
| HD Support | Yes |
| HDMI | Yes |
| USB | Yes |
| Input Connector | F-type |
| Modulation | QPSK, 8PSK |
| Supported Video Formats | MPEG-2, MPEG-4, H.264, H.265 |
| CI Slot | Yes |
| Smart Card Slot | Yes |
| Ethernet Port | Yes |
| Wi-Fi Support | No |
| HDMI Output | Yes |
| Scart Output | No |
| Composite Output | No |
| Component Output | No |
| Optical Audio Output | Yes |
| Weight | 1.2 kg |
| Video Resolution | 2160p (4K UHD) |
| Connectivity | Ethernet, USB |
| Input Frequency Range | 950 ... 2150 MHz |
| Symbol Rate Range | 2 Msps to 45 Msps |
| DiSEqC Compatibility | 1.0, 1.1, 1.2, USALS |
| Supported Audio Formats | MP3, AAC, AC3 |
To Next Page
