TechniSat DIGIT ISIO S3 - Page 95

95
DE
EN
Alternatively:
> Use the right/le arrow buons to select the list to be displayed from the
open channel list. The current list is shown at the top of the OSD.
You can manage your own TV or radio station lists under Menu > Manage TV
lists or Manage radio lists. For more detailed information please consult the
instruction manual.
11.3.6 Back to the last channel selected
> Press the Back buon on the remote control to return to the last channel
selected.
> Press the buon again to return to the channel you were previously watching.
11.3.7 Switching between TV/Radio
> Use the TV/Radio buon to switch between TV and radio mode.
The device switches to the radio station or TV channel last listened to or
watched.
Also observe the seing for the radio/music OSD in your instruction manual.
11.3.8 Selecting a regional channel
During the initial installation, you selected your preferred regional channels for some
channels. If you now select one of these channels, a note appears in the info box
stating that additional regional channels are available for selection.
> Use the Options selection to select between the various regional channels
under Region .
The selected regional channel is now stored as a preferred regional channel
from this broadcaster.