eight devices and an additional device is paired, the earliest paired device is deleted
from memory.
Do factory reset will clear Bluetooth memory.
General Settings
Set Sleep
Press 1. MENU press or to < Sleep >, then press SELECT to conrm.
Press 2. or to dene the sleep period: off/15/30/45/60/90 minutes.
When your selecting period is appeared, simply stop pressing, and it is done.3.
Note: At this step, and sleep icon shows up, as well as shows how long it will be expired.
4. Select < Sleep > option again and then press SELECT to check how long the sleep
time can be reached.
5. Radio will automatically enter to standby mode once the set time has elapsed.
6. To continue enjoying your program, press .
Set Time
It can be activated by pressing MENU < Time >, press SELECT to enter a range of
time settings:
Set Time/Date: Manually set-up both Time and Date
Auto update: ‘Update from DAB’ and ‘No update’
Set 12/24 hour: ‘Set 24 hour’ and ‘Set 12 hour’
Set date format: ‘DD-MM-YYYY’ and ‘MM-DD-YYYY’
Set Alarm
Note : Setting Alarm, make sure setting time at rst.
PressALARM1,itwillshows“Alarm1Setup”,alsopressALARM2accessto“Alarm2
Setup”, meanwhile, relevant alarm icon twinkling.
Take set alarm 1 as example, while it shows: “Alarm 1 Setup”, press SELECT
to conrm.
Now, follow your radio instruction, congure the following parameters:
Alarm states : On or Off
To Next Page
Loading...
General