TechniSat DIGITRADIO 52

96 97
DE
EN
FR
NL
Alternatively:
> Open the Menu by briefly holding down the SELECT/MENU buon and use the <
/ > buons to select the [Station list] item. Then press the SELECT/MENU briefly
to confirm. You can then use the < / > buons to select a station and play it with
SELECT/MENU.
7.2.3 Saving DAB+ stations to a memory slot
The programme memory can save up to 20 stations within the DAB range.
> First select the desired station (see section 7.2.2).
> In order to store this station in a memory slot, hold down the Favourites
memory 1 or 2 buon during playback.
> In order to save a station to the Favourites memories 3-20, hold down the
Favourites memory 3+ buon and then select a memory slot using the < / >
buons. Press SELECT/MENU buon to save.
> Repeat this process to save additional stations.
7.2.1 Performing a full scan
The automatic scan Full Scan scans all DAB+ Band III stations and thereby finds
all stations being broadcast within the reception range.
Aer the scan is complete, the first station is played back in alphanumeric order.
> In order to perform a complete scan, open the menu by keeping the SELECT/
MENU buon depressed and use the <, > and buons to select the [Complete
Scan] menu item. Then press the SELECT/MENU buon briefly.
>
[Scanning...] appears on the display.
During the scan a progress bar and the number of stations found is displayed.
If no stations are found, check the dipole antenna and change the installation
location if required (Section 5.3.2).
7.2.2 Selecting the station
> By pressing the < or > buons, the station list can be called up and you can
switch between the available stations.