TechniSat DIGITRADIO 52

114 115
DE
EN
FR
NL
10.2 Display brightness
It is possible to set the display brightness both for operation as well as standby mode.
> Hold the SELECT/MENU buon down briefly. Use the < or > buons to select the
[Brightness] item and press the SELECT/MENU buon.
> Use the < or > buons to select one of the following functions:
[Operation] regulates brightness in the normal operating status. You can choose
from [AUTO], [5 High] and [1 Low] brightness intensities. Using the < or >
buons, select a brightness intensity and press the SELECT/ MENU buon to
save.
[Standby] regulates the brightness in standby mode. Here, you can chose
between the brightness intensities [AUTO], [4 High] and [0 O]. Using the < or
> buons, select a brightness intensity and press the SELECT/ MENU buon to
save.
10.3 Language
> Hold the SELECT/MENU buon down briefly. Use the < or > buons to select the
[Language] item and press the SELECT/MENU buon.
> Use the < or > buons to select one of the available languages and confirm by
pressing the SELECT/MENU buon.
10.1.4 Seing the date format
In the Set Date Format submenu you can specify the format for displaying the date.
> Hold the SELECT/MENU buon down briefly. Use the < or > buons to select [Set
Time/Date] and press the SELECT/MENUbuon.
> Use the < or > buons to select [Set Date Format] and press SELECT/MENU.
> Use the < or > buons to select one of the following options:
[DD-MM-YYYY] (day, month, year)
[MM-DD-YYYY] (month, day, year)
> Press the SELECT/MENU buon to save.