TechniSat TECHNIRADIO 40 - Page 79

79
DE
EN
FR
NL
6.4.2 Switching o the device
> Keep the On/Standby/Mode buon (4) depressed to switch the device to
standby mode. [Standby] appears briefly on the display. The date and time
are shown on the display. The display brightness in standby mode can be
adjusted as described in Section 11.2.
6.4.3 Selecting the source
> Using the On/Standby/Mode buon (4), it is possible to switch between the
DAB+ (digital radio) and FM sources. Briefly press the buon repeatedly to do
so.
6.4.4 Seing the volume
> Adjust the volume using the VOL +/- buons (8, 9).
The set volume is shown on the display by a bar chart.
When the volume is completely turned down (Mute), the device will switch to
standby mode aer approx. 15 minutes.