WS 9178 Manual
starts to flash. Press the “+” button to set the
correct 12/24 hour mode.
Press “SET” again to confirm your setting, the
Hour display starts to flash. Press the “+”
button to set the correct hour.
Press “SET” again to confirm your setting, the
Minute displays starts to flash. Press the “+”
button to set the correct minute.
Press “SET” again to confirm your setting and
to end the setting procedures, enter the Time
Display Mode.
Note:
After 30 seconds without pressing any button,
the clock switches automatically from Set
Mode to Time Display Mode.
To Next Page
Loading...
