WS 9178 Manual
temperature, press and hold down the “MEM”
button for about 3 seconds. This will reset all
minimum and maximum data recorded to the
current displayed values.
IN/OUT temperature display:
Press the “IN/OUT “key to switch the position
of indoor and outdoor temperature on display.
Wireless remote sensor
Transmitter frequency: 433.92 MHz.
Range of transmission is up to 60m (200feet).
Insert the 2 x AA batteries into the transmitter,
please observe the correct polarity.
Hold the “IN/OUT” button for 3 seconds to
manually search for an outdoor sensor signal.
To Next Page
Loading...
Need help?
General
