EN7
Maximum/minimum temperature/humidity
Press once “MEM” button, the LCD will display maximum value of temperature/
humidity. The LCD will display the minimum value of temperature/humidity. If the
“MEM” button is pressed again the maximum value is displayed.
While displaying MAX or MIN values, there is “MAX” or “MIN” on the LCD.
Press and hold “MEM” button for 3 seconds. The temperature/humidity
maximum/minimum value will reset to the current values
Please note:
If the temperature reading is below ranges, the LL.L will be displayed. If the temperature
reading is above ranges, the HH.H will be displayed.
Ice alert
The ice alert symbol appears and flashing next to the outdoor temperature when the
outdoor temperature at –1℃ to + 3 ℃ or +30℉ to + 37℉.
Weather forecasting function
The weather forecast is calculated from evaluation of fluctuations in the barometric
pressure and may deviate from the actual weather conditions.
The weather station displays the following weather symbols:
su n n y
slig h tly c lo u d y
c lo u d y
ra in y
The weather symbols indicate the weather fluctuation over the next eight hours and
not the current weather.
Background lighting
Touch the “SNOOZE/LIGHT” button, the backlight illuminates for 8 seconds.
Hereby, Technotrade declares that the products WS 9255 and TX205D-TH are in
compliance with the essential requirements and other relevant provisions of Directive
2014/53/EU and ROHS 2011/65/EC. The original EU declaration of conformity may be
found at: www.technoline.de/doc/4029665092553
To Next Page
Loading...
Need help?
General
