EN 3
If the AC main power is interrupted, the backup batteries will keep the time and all settings of your unit.
Press once will turn on the backlight for 10 seconds and then it will go off again.
Station Outdoor sensor
REMARKS:
Insert the holder to the bottom of the outdoor transmitter for desktop or insert it to the back of
the transmitter for wall mount purpose.
Keep in mind that your outdoor transmitter has a 50-meter open air transmission with no
obstructions.
Actual transmission range will vary depending on what is in the path of the signal. Each
obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
TO SET THE WEATHER STATION
You can set your weather station in the sequence of time, 12/24HR, calendar, snooze duration and
weather forecast condition:
1. Press and hold the SET button until the hour digits flash. Press or button to set the hours.
Press and hold / will accelerate your setting.
2. Press the SET button again, the minute digits flash. Press or button to set the minutes.
Press and hold / will accelerate your setting.
3. Press the SET button again, the time digits change to “24Hr”. Press or to select “12Hr”
time format. When 12Hr time format is selected, PM indicator will be displayed.
4. Press the SET button again, “2019” digits flash. Press or button to set the year.
5. Press the SET button again, month digits flash. Press or button to set the month.
6. Press the SET button again, date digits flash. Press or button to set the date.
7. Press the SET button again, “m”, “d”, month-date digits flash. Press or to select month-
date “m” and “d” or date-month “d” and “m” calendar display.
8. Press the SET button again, “n05” flash. Press or button to set the snooze duration from
5 minutes to 60 minutes.
9. Press the SET button again, weather icons flash. Press / button to set the weather
forecast condition according to the forecast on TV or internet.
To Next Page
Loading...
Need help?
General
