EasyManuals Logo

Techno Line WS6447 User Manual

Techno Line WS6447
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
EN 7
SPECIFICATIONS:
Temperature Range
Indoor +32°F to +122°F (0°C to +50°C) (display shows HH.H / LL.L if out of this range)
Outdoor -13°F to +158°F (-25°C to +70°C) (display shows HH.H / LL.L if out of this range)
Humidity Range
Indoor 20% - 95%
Outdoor 20% - 95%
Temperature Resolution 0.2°F / 0.1°C
RH% Resolution 1%
Time format 24 hrs
Time 0:00
Alarm 1 and 2 6:00 am
Alarm Duration 2 minutes
Snooze Duration 5 minutes
CARE OF YOUR WEATHER STATION
1. Do not expose the unit to extreme temperature, water or direct sunlight.
2. Avoid contact with any corrosive materials.
3. Do not subject the unit to excessive force, dust or humidity.
4. Do not open the inner back case or tamper with any components of this unit.
5. Do not plug in any other AC/DC adaptor with incorrect specifications or voltage.
6. Always place your outdoor transmitter in a dry and shaded area away from direct sunlight or
rain.
Precautions
This main unit is intended to be used only indoors, the outdoor sensor is to be used outdoors.
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
Do not immerse in water.
No outdoor
temperature and
humidity is
displayed
1. Press and hold / on the weather station to search for
outdoor temperature signal again.
2. Press and hold / , then take out the batteries and
reinstall with new ones to your outdoor transmitter.
3. Make sure the correct channel is selected on your weather
station (default setting is Channel 1)
4. Observe if the Low Battery icon appears on the right of the
outdoor temperature. If yes, replace batteries in outdoor
transmitter with new alkaline batteries.
5. No other interfering sources are being used (such as computer
monitors, TV sets, headphones, or speakers) in the path of
signal from the outdoor sensor. The signal travels in a straight
line, an electrical source near that “line” may cause interference.
Temperature
and humidity
are incorrect
1. Make sure your main unit and the outdoor transmitter is away
from sources of heat / cold / direct sunlight / rain.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Techno Line WS6447 and is the answer not in the manual?

Techno Line WS6447 Specifications

General IconGeneral
BrandTechno Line
ModelWS6447
CategoryWeather Station
LanguageEnglish

Related product manuals