GB 3
4.2 Manual Time Setting:
In time display mode, hold “MODE” button (B1) for 3 seconds to enter Clock/Calendar
setting Mode.
Press “+” (B4) or “-” (B5) button to adjust the setting and press “MODE” button (B1) to
confirm each setting.
(By keeping the “+” (B4) or “-” (B5) button pressed, could accelerate the process and
reach the desired value more quickly)
The setting sequence is shown as follow: Hour, Minute, Second, Year, Month/Day
sequence, Month, Date, Weekday Language, Time Zone
There are 8 languages for day of week: German, English, French, Italian, Dutch, Spanish,
Denmark and Russian. The languages and their selected abbreviations for each day of
the week are shown in the following table.
Note:
All Setting mode will automatically exit in 15 seconds without any adjustment
For Time Zone: If you receive no RC-DCF frequency signal, the time zone should be set
to 0. Time Zone is used in countries which can received the DCF frequency signal but the
time zone is different from German Time ( i.e. GMT+1).
4.3 Daily Alarm Function:
Press “ MODE” button (B1) to select to view alarm Time, “AL” shown on the display
When viewing the Alarm Time, hold “MODE” button (B1) for 3 seconds to enter Alarm
Time setting. Press “+” (B4) or “-” (B5) button to adjust the alarm time. Press “MODE”
button (B1) to confirm the setting.
4.4 Snooze Alarm Function:
Press “ALARM” Button (B3) to activate or deactivate the alarm. If the alarm is on, alarm
icon " " appears on the display.
Press “SNOOZE” (B2) button when alarm alerts. The alarm snoozes for 5 minutes, then it
alerts again. “ ” flashes on the LCD during the snooze time. This process can be
To Next Page
Loading...
Need help?
General
