EN6
Radio reception is weaker in rooms with concrete walls (e.g.: in cellars)
and in offices. In such extreme circumstances, place the system close
to the window.
During the RC receive mode, only the
"SNOOZE" and " " button function, other button
operation have no function, If you want to carry out other functions of
operation, please press “ ” button to exit the RC receiving
mode.
When receiving radio waves, the backlight and projection will be
temporarily off, and the brightness will be restored after receiving.
Manual time setting
Press and hold the “ ” button for 2 seconds, the RCC ON/OFF
display starts to flash, and press the “+” or “-” buttons to set the RCC
function is ON or OFF.
Press the “ ” button to confirm the item has been set and go to
the next one, the sequence of setting items is as follows:
RCC on/off12/24Hr Time zone Hour Minute Format of
Date (D/M or M/D) Year Month Date Language of week days
Press “ ”button to confirm the last item to end the setting mode,
then it will return to the normal time display mode.
Notes:
If there is no valid operation within 20 seconds, it will automatically
return to normal time display mode from the setting mode.
When adjusting the value, press and hold the “+” or “-” button to adjust
quickly.
When choosing the 12Hr format, if “PM” is displayed before the hours, it
means that the hour is after noon.
The 7 languages that show week abbreviations are listed below:
To Next Page
Loading...
Need help?
General
