EN8
button to set the required hour.
Press button “ ” to confirm your setting, the minute of the
alarm 1 time starts to flash, press the “+” or “-” button to set the required
minute.
Press button “ ” to confirm your setting and to end the setting
of Alarm1.
When Alarm 2 is displayed，press and hole button “ ” for 2
seconds until hour of the alarm 2 time starts to flash, press the “+” or “-”
button to set the required hour.
Press button “ ” to confirm your setting, the minute of the
alarm 2 time starts to flash, press the “+” or “-” button to set the required
minute.
Press button “ ” to confirm your setting and to end the setting
of alarm 2.
Notes:
If there is no valid operation within 20 seconds, it will automatically
return to normal time display mode from the setting mode.
When adjusting the value, press and hold the “+” or “-” button to adjust
quickly.
The alarm will sound for 2 minutes if you do not deactivate it by
pressing any button. In this case the alarm will be repeated
automatically after 24 hours.
Turn OFF the alarm sound
When the alarm is ringing, press any button except the “SNOOZE”
button to stop the alarm sound.
This time of the next day will ring again.
Snooze function
When the alarm is ringing, press the “SNOOZE” button the alarm
sounds to get to snooze mode. The alarm signal sounds again after 8
To Next Page
Loading...
