EN4
displayed.
Please note:
If there is no valid operation within 30 seconds, the clock will automatically return to normal time mode from
the set mode.
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm will
be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes)
Automatic Snooze function:
While the alarm is sounding, touch the “ ” to activate snooze function. The Snooze function is active
and a flashing “ ” icon appears on the display.
This stops the alarm for 5 minutes and will sound again.
The Snooze function can be interrupted by pressing any other button.
°C/°F temperature display:
The temperature is displayed either in °C or °F. Pressing the “- “ button allows you to switch between °C or °F.
Hereby, Technotrade declares that this product WT260 is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The original EU declaration of
conformity may be found at: www.technoline.de/doc/4029665002606
Specifications:
Battery life 12 months
Environmental requirement: usage -10～50℃ & 20%～95%
storage -20～60℃ & 20%～95%
Environmental reception effects
The clock obtains the accurate time with wireless technology. Same as all wireless devices, the reception is
maybe affected by the following circumstances:
long transmitting distance
nearby mountains and valleys
near freeway, railway, airports, high voltage cable etc.
near construction site
To Next Page
Loading...
Need help?
General
