For Support Visit· support.technocnc.com or Call: (631) 648-7481
49
HDS User Manual
(HTT06291133)
Please see the following Example:
Click “Utility.” Click “Table Editor.”
NOTE:
Right-hand and
left-hand tools
are required.
How to Set Up Tool Offsets with Aggregate Tools
Center
21
3
Click here
for tool
lengths.
Click here
for English
units.
X Tool Offset = Total Length – 3.4843"
(88.5 mm)
1.612"
3.4843"
3.4843"
(88.5 mm)
(88.5 mm)
X Offset
In the offset screen, you will enter the following values for
the aggregate offset.
4
Total Length
5.0963
To Next Page
Loading...