MYRUN TECHNOGYM
D
D
15
Safety devices and warnings
User Present Function
The user present function is a safety function which stops the belt if it is moving without any person walking or running on it.
This function is activated if the belt is at a speed greater than or equal to 3 km/h.
If no user is detected for 30 seconds when at a speed of 3 km/h or more, the belt stops and the exercise is paused.
At minimum speed, the user is detected only if they weigh at least 50 kg.
Marking on the treadmill belt (D)
The marking on the two sides of the treadmill belt indicates if the treadmill
is moving.
To Next Page
Loading...
