SNOOZE SETTING:
Snooze time
The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes):
1. Use the IN key to set the snooze time. Each pressing of the key will increase the snooze time by 5 minutes.
The snooze can also be set OFF when the “OFF” digit is being displayed.
2. Confirm with the SET key and enter the “ºC / ºF temperature display setting” or exit the manual setting
mode by pressing the CH or SNZ key.
Note:
If the snooze time has been set “OFF”, the snooze function will not be activated.
°C/°F TEMPERATURE DISPLAY SETTING
Flashing
The default temperature reading is set to °C (degree Celsius). To select °F (degree Fahrenheit):
1. The “°C” will be flashing, use the IN key to toggle between “°C” and “°F”.
2. Once the desired temperature unit has been chosen, confirm with the SET key and enter the “Weather
Forecast Icon Sensitivity setting” or exit the setting mode by pressing the CH or SNZ key.
43
To Next Page
Loading...
Need help?
General
