EN 4
4. Press SET once again or if no key pressed for approx. 10 seconds to exit the
Alarm 2’s setting mode.
TO TURN ON OR OFF ALARM 1 AND 2
1. At normal time display, press AL 1.2 / ON·OFF once to activate Alarm 1, appears.
2. Press once again to activate Alarm 2. appears.
3. Press again to activate both Alarm 1 and 2. Both and appear.
4. Press again to deactivate both alarms (both and disappear).
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When alarm 1 or 2 is sounding, the related alarm icon flashes. Press the AL 1-2 ON·
OFF once to stop the alarm and reset it to come on the following day. After that both
and/or remains on the display.
TO ACTIVATE THE SNOOZE FUNCTION (default snooze duration is 5
minutes)
When alarm is sounding, press once, the alarm will be silenced and come on
again after the set snooze duration.
Note: if your second alarm activates while the first alarm is sounding or it is in the snooze
mode, the second alarm overrides the first alarm (the first alarm is reset to come on the
next day).
Alarm Duration : 2 minutes
AUTOMATIC LIGHT SENSOR
Your clock is equipped with an automatic light sensor at the top of the back case. The
brightness of backlight will be adjusted to lower level when your room environment is
dim.
Please keep your clock at least 60-cm distance away from any objects on top.
TO DISPLAY TEMPERATURE IN DEGREE °C OR °F
Simply press C/F to display temperature in degree °C or degree °F.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused
by electro-static discharge or other interference, unplug the DC jack to disconnect the AC
power (and remove the backup battery), then hold the button 3 seconds. The
clock radio will be reset to default settings and you need to set it again.
SPECIFICATIONS
Indoor Temperature Range 0°C to +50°C (+32°F to +122°F)
Temperature Resolution 0.1C
Alarm Duration 2 minutes
Snooze Duration 5 minutes
To Next Page
Loading...
Need help?
General
