Technoline WT549 - Alarm Time and Snooze Setting; Setting First and Second Alarm Times; Setting Snooze Time

WT549 Manual
EN14
 Press and hold “ALARM” button for 2 seconds until
hour of the first Alarm time starts to flash. Use the “+”
and “-” buttons to set the required hour.
 Press “ALARM” button to confirm your setting, The
Minute of the Alarm time starts to flash. Use the “+”
and “-” buttons to set the minute.
 Press “ALARM” button for 2 until hour of the second
Alarm time starts to flash. Use the “+” and “-” buttons
to set the required hour.
 Press “ALARM” button to confirm your setting, The
Minute of the Alarm time starts to flash. Use the “+”
and “-” buttons to set the minute.
 Press “ALARM” button to confirm your setting. The
snooze time of the Alarm starts to flash. Use the “+”
and “-” buttons to set the Snooze time.
 Press “ALARM” button to confirm your setting and to
end the setting procedure.
Please note:
 After 30 seconds without pressing any button the
clock switches automatically from setting mode to