EasyManua.ls Logo

TechnoPiano TP300C - Page 16

TechnoPiano TP300C
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATING GUIDE
EN
1 4
MIDI IN/OUT
The term MIDI is an acronym for Musical Instrument Digital Interface, an international
standard for connecting synthesizers, sequencers (digital recorders) and other electronic
instruments so that they can exchange performance data.
This piano is equipped with two MIDI jacks for exchanging data: MIDI IN and MIDI OUT.
Each port requires a special cable with a DIN connector.
MIDI IN: For receiving note messages, program change and other data.
MIDI OUT: For sending note messages, program change and other data.
USB PORT
USB or MIDI interfaces can be used to connect this digital piano to other MIDI devices and
computers with software sequencer.
AUDIO INPUT/OUTPUT
Audio Input
Before external audio source is connected to this product through the Audio In Jack, please
turn down the volume of tone source at first, then adjust the volume to a satisfactory level
after connection.
Audio Output
Before connecting an audio amplifier to the Audio Out Jack, please turn down volume of the
digital piano first, then adjust the volume to a satisfactory level after connection.