Technotherm VPS 1000 - Technical Characteristics

Installaon and Operang Instrucons
VPS devices
Feel good through warmth from electricity - www.technotherm.de
GB
Technical characteristics
•
Power supplied by the power card
•
Dimensions in mm (without mounting lugs):
H = 71.7, W = 53, D= 14.4
•
Screw-mounted
•
Install in an environment with normal pollution levels
•
Storage temperature: -10°C to +70°C
•
Operating temperature: 0°C to +40°C
Menu 6: Adaptive start control
This feature enables to reach the set-point
temperature at a set time.
When this feature is activated, the display shows a
flashing .
0 = Adaptive start control deactivated
1 = Adaptive start control activated
To modify, press on the + or – buttons, then press
OK to confirm and to go to the next setting.
Adjusting the time-temperature-slope (when
adaptive start control is activated)
From 1°C to 6°C, in steps of 0.5°C.
If the set-point temperature is reached too early,
then a lower value should be set.
If the set-point temperature is reached too late,
then a higher value should be set.
Menu 7: Productnumber
This menu allows you to view the product
number.
To exit the configuration mode, press OK.