Operation
Operation
6 Operation
6.1 Switch on / off
Press Standby on the remote control on the receiver.
6.2 Channel selection
6.2.1 Using CH+ and CH-
By pressing CH+ and CH- you can change the current channel.
6.2.2 Using the number keys
Using the number keys you can directly select a specific channel.
6.2.3 Using channel list
Press OK to get a channel list overview. Using CH+ / CH- you move
one by one, using PGUP / PGDN you will move in steps of 10. Press
OK to switch. You have further options:
• Blue function key (Search)
• Red function key (Sort)
EXIT leaves the program list.
6.3 Info banner
You get a short info banner every time you change a channel and
when pressing the INFO key. This info banner provides the following
information:
• Program name
• Actual date & time
• Name & schedule of the running and the following show
• Channel number of the selected program
• A heart symbol means this channel is in a favorite list
• Available additional service like subtitles, teletext or EPG.
TT-micro C2810
55
To Next Page
Loading...