EasyManuals Logo

TECHWOOD TB-1622 User Manual

TECHWOOD TB-1622
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
(*)
Competent qualified person : after sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs.
SPECIFIC WARNING FOR KETTLES
WARNING:
If the water is overfilled, boiling water may be rejected.
Do not remove the lid while the water is boiling.
Always use cold water to fill the device
Never exceed the maximum level (MAX).
Note: When the water level reaches the minimum mark (Mini)
Refill the unit.
Always unplug the appliance before filling it with water.
After filling, make sure the cap is in place and closed.
The base and outside of the unit must not be wet.
Otherwise, disconnect the device and wipe with a dry cloth.
The kettle should only be used with the base associated
with it!
GENERAL INFORMATION
The symbol "OPEN BOOK" means a recommendation
to read important things contained in the record.
The symbol "BIN" crossed out, abbreviation WEEE
(Waste of Electrical and Electronic Equipment) means
that at the end of life, it should not be discarded with
household waste, but filed to the sorting of the locality.
Waste recovery can help preserve our environment.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TECHWOOD TB-1622 and is the answer not in the manual?

TECHWOOD TB-1622 Specifications

Power IconPower
power supply voltage220-240V
frequency50/60Hz
power1850-2200W
Capacity IconCapacity
capacity1.6 L