EasyManuals Logo

TECHWOOD TB-1622 User Manual

TECHWOOD TB-1622
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
For more information : http://www.quefairedemesdechets.fr
CAUTION: RISK OF BURN.
During operation, the surface temperature of the
unit may be hot.
The heating elements remain warm for a long time
after the appliance is switched off.
The "HOT SURFACE" symbol warns the user that
the walls of the appliance may become very hot and to take the
necessary precautions.
FIRST USE OF THE MACHINE
Before using the machine for the first time :
1. Put the electric charger base on a flat surface.
2. Fill the kettle with fresh water (without any additives.).
Note : Do not overfill ! Use the water level indicator.
3. Place the kettle on the base.
4. Only connect the machine to a properly installed safety socket.
5. Switch the machine to position ON. The control lamp, on the kettle, light in
Red, shows that the water is heating.
6. When boiling the machine switches off automatically and the pilot light also
switches off.
7. Take the Kettle and pour genteelly the water in a sink. Take care to ovoid
any burn.
Note : Do not press up the lid when pouring.
USING
Always place the unit on a table or flat horizontal surface.
1. Fill the fresh water tank with the desired amount. (Do not exceed the maximum
level - MAX)
2. Put the kettle on the base already plugged into an electrical outlet in good
condition.
3. Turn the power switch to "On" The pilot lights up red, showing that the water
starts to heat.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TECHWOOD TB-1622 and is the answer not in the manual?

TECHWOOD TB-1622 Specifications

Power IconPower
power supply voltage220-240V
frequency50/60Hz
power1850-2200W
Capacity IconCapacity
capacity1.6 L