English - 3 -
The Energy Saving settings can be found in the Sys-
tem>Picture menu. Note that some picture settings
If pressed Right button while Auto option is selected or
Left button while Custom option is selected, “Screen
on the screen. Select Proceed and press OK to turn
If you don’t press any
. Press
any button on the remote or on the TV to turn the
screen on again.
Note: Screen O option is not available if the Mode is set
to Game.
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
Features
HD TV by doubling the pixel count of the Full HD TV
and DVB-S2 broadcasts.
Remote controlled colour TV
sockets
USB input
OSD menu system
Stereo sound system
Teletext
Headphone connection
Automatic programming system
Manual tuning
Automatic power down after up to eight hours.
Sleep timer
Child lock
Automatic sound mute when no transmission.
NTSC playback
PC input
Programme recording
Programme timeshifting
High Dynamic Range (HDR) / Hybrid Log-Gamma
(HLG): Using this feature the TV can reproduce
greater dynamic range of luminosity by capturing
HDR/HLG promises better picture quality thanks to
brighter, more realistic highlights, more realistic color
areas of dark shadows and sunlight with full clarity,
colour and detail. HDR/HLG contents are supported
source input as Enhanced from the Sources option
in the Settings menu in order to watch HDR/HLG
least HDMI 2.0a compatible in this case.
Accessories Included
Remote Control
Batteries not included
Instruction Book
into standby. When you next switch-on, the following
message will be displayed: “TV switched to stand-by
mode automatically because there was no signal
for a long time.” Press OK to continue.
The Auto TV OFF
System>Settings>More
by default. If this setting is not set as and the TV
has been left on and not been operated during the
set time, it will switch into standby mode after the set
time has expired. When you next switch-on the TV, the
following message will be displayed. “TV switched to
stand-by mode automatically because no operation
was made for a long time.” Press OK to continue.
TV Control & Operation
The joystick allows you to control the Volume /
Programme / Source and Standby-On functions of
the TV.
Note:
the model.