English - 9 -
not meet the speed requirements. Try connecting
another USB disk.
Media Browser Menu
USB disk by connecting it to your TV. Connect a USB
disk to one of the USB inputs located on the side of
the TV. Pressing the Menu button while in the Media
Browser mode will access the Picture, Sound and
Settings menu options. Pressing the Menu button
again will exit from this screen.
You can set your Media
Browser preferences by using the Settings menu.
Loop/Shue Mode Operation
Start playback with the Play
continuously played in original
order
Start playback with the OK
Start playback with the Play
played once in random order
Start playback with the Play
,
continuously played in the
same random order.
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
using the remote control of the TV.
The CEC option in the System>Settings>More menu
should be set as Enabled
Source
button and select the HDMI input of the connected
Sources List menu. When
in source menu with its own name instead of the
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.
the remote again, press Quick Menu button on the
remote, highlight the CEC RC Passthrough and
set as by pressing Left or Right button. This
feature can also be enabled or disabled under the
System>Settings>More menu.
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
outputs automatically. So you need to decrease TV
Note: ARC is supported only via the HDMI2 input.
System Audio Control
the Speakers option in the System>Settings>More
menu as . The TV speakers will be muted
from the connected sound system.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.
To Next Page
Loading...
Need help?
General
