PROVASET T3LPF REV.20210610
11
• serial lines USB slave and RS232/RS485 for remote management from a com-
puter;
•
-
cation to ISO9001:2008 standards.
3.1.1 Available options
• Option - : barcode management, qr code and label printer;
• Option - : programmable outputs;
• Option - : SPC statistics function and daily and hourly counters;
• Option - : user access and data logging in accordance with FDA CFR 21
part 11;
• Option - IO421: expansion board for interface ;
• Option - IO400: expansion board for interface ;
• Option - 8-in / 8-out expansion board (supplied as an option for slot 2);
• Option - Eth: communication over ethernet connection;
• Option - V24: external power supply 24Vdc.
3.1.2 Available accessories
• tower lights (semaphore) with audible alarm;
•
• remote commands box;
•
3.2 Packaging and transport
The type of packaging is selected according to the transport means, the quantity to
be delivered and the place of destination.
Normally, every single instrument is contained within a cardboard box.
Keep the cardboard packing in order to use it when the instrument is shipped to au-
thorized service centers or to the manufacturer for required maintenance.
If the original packaging has not been stored, use a cardboard box, with adequate
-
vent any movement of the instrument inside the box.
Transport must be carried out at temperatures between –10 °C and 50 °C, with a max-
imum relative humidity of 50% and ambient pressure between 700 hPa and 1100 hPa.
3.3 Storage
In case of prolonged inactivity, keep the equipment, possibly packaged, or otherwise
protected, in rooms with a temperature between 0 ° C and 50 ° C, maximum relative
humidity 50%, ambient pressure between 700 hPa and 1100 hPa.
Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com
To Next Page
Loading...
