PROVASET T3LPF REV.20210610
69
If in the parameter PRINT or is selected the param-
eter enables the selection of a printer model on the menu page that
contains all the types of printers that Tecna provides.
Address of the Modbus RTU node for communication on the serial line.
Serial line type; to choose: RS232, RS485.
Baud rate of the serial line; 8 bit format, no parity, 1 stop bit.
To select: 4800, 9600, 19200, 38400, 56000, 57600, 115200 baud
Communication protocol manuals are available on request.
6.11 Unit: serial line 2 (second expansion board, option)
Communication protocol: as above for serial line 1.
Modbus registers format: as above for serial line 1.
Address of the Modbus RTU node for serial line 2.
Serial line type: as above for serial line 1.
Baud rate of serial line 2: as above for serial line 1.
6.12 Change date and time unit
The clock and calendar functions are used to record the date and time of the tests
performed for data collection on the serial line.
in a super-condenser, which can keep it running for about 7 days.
and time, .
6.13 Unit: password management
Access code for the Administrator. The code is always required for changing the gen-
Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com
To Next Page
Loading...
